Showerdome® installation

You can choose to buy online and DIY install, or have a professional installer supply & install your Showerdome® shower top.

Ask a Question

Nationwide installer network

You can choose to install a Showerdome® yourself, but given the nature of the product and the precise trimming required we recommend using one of our experienced certified installers.

For a perfect fit and complete peace of mind, contact your local Showerdome® installer today. They’ll supply the right size, trim it to fit your shower cubicle and professionally install your shower top, ensuring all work is watertight and trouble-free.

We have Showerdome® distributors available in Hamilton, Tauranga, Wellington and Christchurch, as well as a large nationwide network of installers and bathroom retailers.

Find a local installer

Video installation guide

See how it’s done by our certified installers, from cutting the wall rails to size and fixing them in place, to measuring and trimming the Showerdome® shower top and securing it to your shower. If you’re experienced with this kind of DIY and you’ve got the right tools, the process can be relatively straightforward.

Printable instructions

Planning to install a Showerdome® shower top yourself? Then download our step-by-step DIY guide. You’ll find all the detail you need in a format you can easily use on the job. Just remember the old rule of thumb – measure twice cut once.

Download PDF

Frequently Asked Questions

Can I fit a Showerdome shower top myself?

Yes you can. You will need to confident cutting and drilling acrylic and will require some basic tools.

Please go to https://showerdome.co.nz/installation/ to see the list of tools required and watch the video of an installation.

If I opt for an installer, how long would they be onsite?

A standard Showerdome® shower top installation takes a trained installer approximately 90 minutes.

What can I do to ensure a successful DIY installation?

Most importantly, read the detailed instruction booklet provided. Double check your measurements before attempting to cut the acrylic.

If the temperature is below 10 degrees Celsius, we suggest you attempt to warm the Showerdome® shower top either by standing it in the warmest room in the house, or next to an oil filled heater for some time prior to cutting.

Once ready to cut, you must ensure that what you are cutting to waste is fully supported while making the cut. If you allow the acrylic you are cutting away to hang down, it will cause feather cracks on the actual dome.

Can we help?

Find out more

Read our FAQ

Give us a call

(09) 835 9797

Need advice?

Ask a question